For INSTRUMENTATION Applications
• Twin Ferrule Tube Fittings
• Single Ferrule Tube Fittings
• Precision Pipe Fittings
• Tube Fittings with Integral Flange
• Ball Valves
• Needle Valves
• Guage / Root Valves
• 2/3/5 Way Manifold Valves
• Monoflange Valves
• Double Block & Bleed Valves
• Purge & Bleed Valves
• Toggel Valves
• Relief Valves
• Check Valves
• Micron In-Line Filters
For CNG Applications
• SS316 Twin Ferrule Tube Fittings
• Two Way Ball Valves
• Three Way Ball Valves
• 2/3 Way Manifold Valves
• Check Valves
• Relief Valves
• Hose Pipe
For HYDRAULIC Applications
• Tube Fittings to DIN 2353
• 37° Flare Fittings
• Quick Connect Couplings
• Swivel Joints
• Pipe Fittings
• Needle Valves
• Check Valves
Features & Benefits of Twin Ferrule Tube Fittings
Tube Fittings in material SS316/SS316L are Heat/Lot code traceable
• Guaranteed Right Material
• Improves efficiency, transparency and company integrity.
• Ensure safety capabilities with increased effectiveness.
Silver plating Extend the fittings life by preventing galling across a wide range of temperature.
• Dry lubrication ensure low torque during the assembly.
• No external lubrication required for assembly
• Excellent make-up and re-make life
Precision Machined to very close tolerances by monitoring critical dimensions, profile, surface finish, run out and sharp edges.
The leading edge of back ferrules are case hardened.
• Ensure strong Tube grip.
• Excellent Vibration Resistance.
• Leak-free Gas Seal.
• Reliable performance under high pressure and deep vacuum conditions.
Precision Machined to very close tolerances by monitoring critical dimensions, profile, surface finish, run out and sharp edges.
• Ensure leak free connections between Tube and Body
• Leak-free Gas seal.
• High performance and Safety under high pressure and deep vacuum conditions.
STEAMLOK® provides a slight taper in the base of the tube socket in the Fitting body.
• Reduces the possibility of the tube sticking in Body during disassembly.
STEAMLOK® Twin Ferrule Tube Fittings offers deep vacuum capability with good quality tubing and will be leak tight at vacuum level of 10-9 torr. This test is conducted in-house with ASM 142 Helium Leak Detector (Alcatel) witnessed by TUV and DNV
• Ensures maximum safety and reliability in deep vacuum applications.
STEAMLOK® Twin Ferrule Tube Fittings have been tested to tube burst i.e. 4 x permissible working pressure of the tube.
RESULT : No leakage, cracks or damage were detected in the Tube Fittings throughout the test.
• Ensures maximum safety and reliability in high pressure applications.
