SLM 35
Steam Manifold (SLM 35)

Steam and condensate manifolds are compact assemblies, the housing of which has integrated shut-off valves. They can be fitted either with gland or bellows seals. The valves are completely maintainable, because the valve stem and the internal valve seat can be replaced when the valves start leaking due to soiling. Steam and condensate manifolds are available for both vertical and horizontal mounting. In vertical manifolds, there are secondary connections on both sides of the manifold, but they are only on one side in horizontal manifolds. Lengths of manifolds and valve spacing can be specifically tailored.
• Forged body design for better strength.
• Unique piston and spindle design for ease of operation
• Heat resistant hand wheel
• Properly sized manifolds allow for the dissipation of flash steam prior to entry into condensate return headers.
• This reduces water hammer, pitting and corrosion of main headers.
• These are mainly used for steam distribution and condensate collection for steam tracing lines.
• Steam and condensate manifolds can be applied, for example, for the distribution of steam used in the heat tracing of the steam as well as for the collection of formed condensate.
Size : 15 NB and 20 NB
MOC : ASTM A 105
End Connection : Screwed- BSP, BSPT, NPT, Socket weld
( available in 4-way, 8-way and 12-way connection)
Manifold main line connection – 40 NB Socket weld
Max. Allowable Pressure (PMA) | 51 Bar (g) @ 38 C |
Max. Allowable Temp (TMA) | 425 C @ 28.8 Bar (g) |
Max. Operating Pressure (PMO) | 41.9 Bar (g) @ 250 C |
Max Operating Temperature (TMO) | 400 C @ 34.7 Bar (g) |
Certification | IBR approval / En10204 3.1 |