Chloride Analyzer
Model CA-600
The Chloride Analyzer is an on-line sequential sampling analyzer, a sequence of sampling, analysis and result processing is performed and repeated using colorimetric methods. The measurement is a colorimetric analysis using an LED light source and a heated colorimetric cell designed for measuring trace amounts of analyse in water.
The colorimetric analyzer is assembled with two separated sections. The bottom section is the LIQUIDS section. It includes all of the components involved in the flow, mixing and reaction stages of the sample and reagents. Numerous analysis configurations can be programmed, depending on accessories and of the number of micro pumps mounted in the Liquid Section. The top section is the ELECTONICS enclosure. It includes the main power supply, the controller PCB assembly and the touch screen interface.
The measuring Principle
The Chloride analyzer uses an adaptation of the mercury thiocyanate method to measure chloride. Chloride reacts with mercury thiocyanate and iron based reagents to produce an orange-brown ferric thiocyanate complex. The absorbance intensity is proportional to the chloride concentration in the sample and is measured at 470 nm.
• Simple & Reliable
• Easy installation
• User friendly
• Menu structure touchscreen
• Easy interface Configuration
• Two separate compartments
• Low Reagent Alarms
• Cost Effective & Low Maintenance
• Adjustable Cycle time to minimize reagent usage
Measuring principle | Differential photometric absorbance/colorimetric |
Measuring range | 0.2 to 50 ppm Cl- for the 26 mm cell 0.5 to 100 ppm Cl- for the 16 mm cell up to 5000 ppm Cl- with internal dilution. |
Reproducibility | ± 0.3 ppm or ± 5%, whichever is greater up to 20 ppm; ≥ 20 up to 50 ppm ± 0.5 ppm or ± 5%, whichever is greater (26 mm cell) ± 1 ppm or ± 5%, whichever is greater (16 mm cell) |
Cycle time | 6-8 minutes, including conditioning before analysis cycle and rinsing after measuring |
Accuracy | Depends upon specific range measurement |
Sample Temperature | 41 – 122 °F (5 to 50 °C) |
Sample Pressure | Pressure-free from overflow vessel |
Sample Flow | 80 to 500 mL/min |
Sample Connections | 6 mm (¼-in.) |
Drain Connections | 12 mm (½-in.) |
Monthly reagent consumption (25 minutes analysis frequency) | 1 L with 16 mm cell 2 L with 26 mm cell |
Number of streams | 1, 2 with integrated switching valve Other with external sequencer |
Power supply | 100 – 240 VAC 50/60 Hz |
Analog Output | 4-20 mA outputs |
Digital Output | Modbus RTU RS485 |
Alarms | 4 SPDT programmable potential free relays |
Operating Temperature | 41 – 113 °F (5 – 45 °C) |
Humidity | 10 to 90% non-condensing |
Installation | Panel mount, Wall mount, Rack mount |
Ingress Protection | IP 65 |
Dimensions (H x W x D) | 23.6 x 15.0 x 8.2 in / 606 x 380 x 209 mm |
Weight | Approx. 44 lbs (20 Kg) |
• Boiler feed
• Cooling water
• Drinking water
• Industrial waste water
• Surface water