DSL-340
DSL-340
The DSL-340 Dust Monitor uses the innovative Dynamic Detection Principle (DDP) to measure dust, smoke and particulate concentration present in an exhaust gas flow in a duct, stack or flue. A light beam emitted from the Transceiver (TRX) passes across the duct, stack or flue to a Reflector, which returns the light beam to the TRX. Particles moving through the beam will cause fluctuations in the intensity of light received by the TRX. When calibrated against standard reference measurements, the magnitude of the signal variation relates directly to the dust, smoke and particulate concentration.
• Innovative Dynamic Detection Principle, (DDP), measurement technique
• Measurement reading as mg/m3(when calibrated against standard reference measurements)
• Choice of interface options enabling easy integration into plant control system
• Free utility software for PC based setup, control and data logging
Measuring Principle | Dynamic Detection Principle, DDP, (or Scintillation) |
Operating Wavelength | 510 – 540 nm (green LED) |
Measurement Reading | Concentration (mg/m3) |
Measuring Range | 0 – 1000 mg/m3(user selectable) |
Ambient Operating Temperature | -20 – +50 °C |
Exhaust Gas Temperature | Up to +600 °C |
Accuracy | +/- 2% |
Voltage | + 24 VDC (Optional 90-260 VAC) |
Ingress Protection | IP65 |
• Simpler installation than single pass opacity monitors
• Better accuracy over shorter path lengths, i.e. smaller duct diameter
• Rugged design with no moving parts so low maintenance
• Latched head design to enable ease of access to optics for maintenance
• Non compliant processes
• Boilers and furnaces
• Crematoria
• Incinerators
• Post particulate removal systems such as filter bag houses, electrostatic precipitators or cyclones
• Marine industry for monitoring smoke emissions from diesel engines, incinerators and boilers