Close Circuit Cooling Water Systems
Close Circuit Cooling Water Systems
The closed circuit cooling water system where Circulating water is in a closed circuit. The Circulating water removes the heat from the condenser and flows of cooling towers. In the cooling towers an air flow, natural or forced, cools the water and the water returns to the condenser. Power plants located away from large sources of water utilise this type.The large concrete hyperbolic towers that you see near thermal power plants are used for cooling the circulating water. All Systems are designed in compliance with ASME PTC-19.11, USA, GDCD, UK, EPRI, VGB Standard S006-2012.
• 100% Stand-by Pump, Motor & Heat Exchangers
• Highly recomended to install in case of poor quality of cooling water
• Auto-Change Over Facility
• Fully Stainless Steel Construction
• Capacity: Upto 120kw
• Easy to Maintain
• The raw water requirement is considerably less
• This system is to make up for losses due to evaporation and blow down
• Low Maintenance
• Advanced Design
• Refinery application
• Petrochemical applications
